3.250 Watt, 16 Amper.This is sufficient to ensure the power supply of the most complex stereosystem or home theater. Two sockets are specially designed to connect power amplifiers.
In case a harmful deviation of the mains voltage occurs, the filter instantly switches the system off thus pre-venting its failure. In two minutes, the filter will switch the system on. Ripples are suppressed on-the-fly that does not disturb you when delighting in music or movies.
The POWERGRIP unit is able to connect and disconnect socket groups, one by one to supply power smoothly without abrupt load rises and unpleasant clicks in acoustic systems. Each socket group can be individually ad-justed.
The filter detects and surpasses even extremely slight noises, which are transmitted to the system via supply circuits and can discount enjoyment of listening to music or speech. Moreover, this will prolong the life of the components of your system.
The unit can be switched on/off on command from a Smart Home controller(via a 12 V trigger or an RS232 in-terface) and control over the compatible external devices.
The brushed aluminum faceplate will nicely look in the rack near to your Hi-Fi systems. The unit can also be mounted in a 19” rack. The reasonable arrangement of the sockets will help you to avoid cable-clutter.
|Voltage||190 - 256V|
|Capacity (at 230V)||3.680W|
| || |
|220V AC Socets||11|
|AC line types||Analog, Digital, High Current|
|COAX lines||ANT, Cable, SAT|
|USB power supply||2 outputs: 5V, 2A|
|Emergency limits||≤ 190 ± 4V / ≥ 256 ± 4V|
SETUP AND CONTROL
|Manual control||Multifunctional button on face-plate|
|ON/OFF scenarios||Adjustement of delays between socket groups|
|12V trigger||IN / OUT|
|RS232 integration||Control4, Crestron, AMX etc.|
|AC power cord||1.5 m (optionally - 3 m)|
|19” rack mounts||Included|
| || |
|Faceplate material||Brushed 8mm aluminum|
|Overall dimensions (WxHxD)||440х150х405 mm|